Bost (Shenzhen) New Material Co.,Ltd

BOST-NPPU1

Technical Data Sheet

Product Name: Glass Anti-stain & Interleaving Powder (BOST-NPPU1)

BOST-NPPU1 is a kind mixture of microsphere with moderate hardness and a variety of glass anti-stain protective materials. It is being used to spray on the glass surface to extend anti-stain rate and prevent the glass surface from being scratched. The powder can be easily washed away by water, suitable to float glass production lines and glass processing.

Technical Parameters

Product: White powder
Aqueous solution pH (1%): 2.0~4.5 (dissolved in purified water with a pH of 7.0)
Water content (%): < 0.5%
Angle of repose: < 40°
Anti-stain performance: By used at 0.4 g/m2 , the lifetimes of glass durabilities will be twice or more of the standard test time.
Anti-scratch performance: Meet the JC/T1008-2018 standard.
Particle distribution

Main particle size 100 mesh (150μm)

+60 mesh (250 μm) <15%
+200 mesh (74 μm) >70%
-200 mesh (74 μm) <20%
Usage amount

Powders recommended coverage:

Summer 0.4 - 0.6g/m2;
Winter 0.3 - 0.5 g/ m2.
Measurement methods

For the measurement of the surface coverage, please refer to the documents provided by our company.

Operational requirements

The surface temperature of the sprayed glass is required to be less than 80 ° C, and be careful to prevent slippage when leaking.

For detailed safety advice, please read our BOST-NPPU1 Material Safety Data Sheet.



BOST-NPPU2
Technical Data Sheet

Product Name: Glass Anti-stain&Interleaving Powder (BOST-NPPU2)

BOST-NPPU2 is a kind mixture of micro-balls with moderate hardness and a variety of glass anti-stain and fresh-keeping materials, products sprayed on the glass surface to extend anti-stain rate and prevent the glass surface from being scratched, it could be easily washed away by water, suitable for float glass production lines and glass processing.

Technical Parameters

Product: White powder
Aqueous solution pH (1%): 2.0~4.5 (dissolved in purified water with a pH of 7.0)
Water content (%): < 0.5%
Angle of repose: < 40°
Anti-stain performance: By used at 0.4 g/m2 , the lifetimes of glass durabilities will be twice or more of the standard test time.
Anti-scratch performance: Meet the JC/T1008-2018 standard.
Particle distribution

Main particle size 140 mesh (100μm)

+60 mesh (250 μm) <5%
+200 mesh (74 μm) >70%
-200 mesh (74 μm) <30%
Usage amount

Powders recommended coverage:

Summer 0.4 - 0.6g/m2;
Winter 0.3 - 0.5 g/ m2.
Measurement methods

For the measurement of the surface coverage, please refer to the documents provided by our company.

Operational requirements

The surface temperature of the sprayed glass is required to be less than 80 ° C, and be careful to prevent slippage when leaking.

For detailed safety advice, please read our BOST-NPPU2 Material Safety Data Sheet.



BOST-FPPU2
BOST-FPPU2 is a kind mixture of micro-balls with moderate hardness and a variety of glass anti-stain and fresh-keeping materials, products sprayed on the glass surface to delay or reduce glass mildew and to prevent the glass surface from being scratched, it could be easily washed away by water, suitable for float glass production lines and glass processing.

Technical Parameters

Product: White powder
Aqueous solution pH (1%): 2.0~4.5 (dissolved in purified water with a pH of 7.0)
Water content (%): < 0.5%
Angle of repose: < 40°
Anti-stain performance: By used at 0.4 g/m2, the moldy time is twice or more than the natural moldy time
Anti-scratch performance: Meet the JC/T1008-2018 standard.


BOST-HP01
BOST-HP01 is a white powder compound which has several kinds of anti-stain and interleaving material, sprayed on the glass surface. it could delay and prevent the glass stain, and prevent the glass to hurt, and easily cleaned by water.

State of product: white powder
PH (%): 2.0-4.5
Moisture content (%) : <0.5%
Angle of repose: <40°
Anti-mildew properties: when the amount of use is 0.4 g / m2, the moldy time is twice or more of moldy basis time.
Anti-scratch properties: meet JC / T1008-2018 standards.
Particle Size Distribution:

Main size 100mesh (150μm)

+60 Mesh (250 μm) <15%
80-200 Mesh >70%
-200mesh(74 μm)<20%
Recommended amount:

Summer 0.5 - 0.7g / m2;
Winter 0.3 - 0.5 g / m2.
(Measuring method based on measurements provided by Bost)

Measurement Method:

Covering measurement surface may reference document I provided.

Operating Requirements:

The temperature of the sprayed glass surface should be less than 80 ° C,pay attention to slip when leaks.

Detailed Security Advisory Please read BOST-HP01 Material Safety Data Sheet.



BOST-HP02
BOST-HP02 is a white powder compound which has several kinds of anti-stain and interleaving material, sprayed on the glass surface. It could delay and prevent the glass stain, and prevent the glass to hurt, and easily cleaned by water.

State of product: white powder
PH (%): 2.0-4.5
Moisture content (%) : <0.5%
Angle of repose: <40°
Anti-midew properties: when the amount of use is 0.4 g / m2,the moldy time is twice or more of moldy basis time.
Anti-scratch properties: meet JC / T1008-2018 standards.
Particle Size Distribution:

Main size 140mesh (100μm)

+60 Mesh (250 μm) <10%
80-200 Mesh >70%
-200Mesh(74 μm)<30%
Recommended amount:

Summer 0.5 - 0.7g / m2;
Winter 0.3 - 0.5 g / m2.
(Measuring method based on measurements provided by Bost)

Measurement Method:

Covering measurement surface may reference document I provided.

Operating Requirements:

The temperature of the sprayed glass surface should be less than 80 ° C,pay attention to slip when leaks.

Detailed Security Advisory Please read BOST-HP02 Material Safety Data Sheet.



BOST-FSP01
FSP01 is a white powder compound which has several kinds of anti-stain and interleaving material, sprayed on the glass surface. it could delay and prevent the glass stain, and prevent the glass to hurt, and easily cleaned by water.

State of product: white powder
PH (%): 2.0-4.5
Moisture content (%) : <0.5%
Angle of repose: <40°
Anti-mildew properties: when the amount of use is 0.4 g / m2, the moldy time is twice or more of moldy basis time.
Anti-scratch properties: meet JC / T1008-2018 standards.
Particle Size Distribution:

Main size 100mesh (150μm)

+60Mesh (250μm) <15%
60-200 Mesh >70%
-200Mesh(74μm) <20%
Recommended amount:

Summer 0.3 - 0.7g / m2;
Winter 0.3 - 0.5 g / m2
(Measuring method based on measurements provided by Bost)

Measurement Method:

Covering measurement surface may reference document I provided.

Operating Requirements:

The temperature of the sprayed glass surface should be less than 80 ° C, pay attention to slip when leaks.

Detailed Security Advisory Please read BOST-FSP01Material Safety Data Sheet.